Adafruit DC Stepper Motor Hat for Raspberry Pi - Mini Kit
35,05€
disponibile
2 new from 30,98€
Spedizione gratuita
as of 8 Maggio 2024 6:52
Caratteristiche
- Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
Adafruit 2340 - Scheda di Sviluppo per Raspberry Pi
34,90€
disponibile
as of 8 Maggio 2024 6:52
Caratteristiche
- Aggiungi un tocco capacitivo al tuo Raspberry Pi Project
- Funziona alla grande con Raspberry Pi Model A+ o B +.
- Facile da usare.
- Richiede una saldatura leggera.
Adafruit RGB Matrix Bonnet pour Raspberry Pi
29,28€
disponibile
2 new from 27,99€
1 used from 24,10€
Spedizione gratuita
as of 8 Maggio 2024 6:52
Caratteristiche
- Il modo più semplice per controllare la matrice LED RGB
- Plug dritto nel tuo Pi come qualsiasi altro cappello
- Funziona meglio con Adafruit LED Matrices
- Fornito assemblato, non richiede saldatura!
- A great guide/helpsheet is available online
Adafruit 12 x capacitive Touch Shield for Arduino - MPR121 [ADA2024]
31,02€
disponibile
as of 8 Maggio 2024 6:52
Caratteristiche
- Adafruit Numero di parte: 2024
- Tipo di cuscinetto: Arduino > > > scudi > > touch
- Disponibile in magazzino
Hailege 10pcs TTP223B Capacitive Touch Switch Module Touch Sensor Switch Digital Capacitive Touch Sensor Switch DC 2~5.5V for Arduino Raspberry Pi
9,99€
disponibile
as of 8 Maggio 2024 6:52
Caratteristiche
- This is the "momentary" variety of the touch sensor - touch and it turns on, release and it turns off.
- Positive and negative can be used as a touch surface,can replace the traditional touch button.
- In addition to the thin paper ( non-metallic ) covering the surface of the module , as long as the correct location of the touch , you can make hidden in the walls, desktops and other parts of buttons.
- The module is based on a touch-sensing IC (TTP223B) capacitive touch switch module. In the normal state, the module output low, low power consumption; When a finger touches the corresponding position, the module output high, if not touched for 12 seconds, switch to low-power mode.
- With four M2 screws positioning holes for easy installation.Module can be installed in such as surface plastic, glass of non-metallic materials.
Freenove 7 Inch Touchscreen Monitor for Raspberry Pi, 800x480 Pixel IPS Display, 5-Point Touch Capacitive Screen, Driver-Free DISPLAY Port
53,95€
disponibile
as of 8 Maggio 2024 6:52
Caratteristiche
- Specifically for Raspberry Pi -> Only need the connection to the DISPLAY port of your Raspberry Pi. (No other connection required.)
- Compatible models -> Raspberry Pi 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+. (No HDMI. Not compatible with any other device.)
- Compatible systems -> Raspberry Pi OS (multi-touch available) / Ubuntu (single touch only).
- Screen parameters -> 7 inch, 800x480 pixel, IPS type wide viewing angle, 5-point touch capacitive screen.
- Easy to use -> No configuration is required (for new and configuration-unchanged systems).
SunFounder Robot HAT scheda di espansione progettata per Raspberry Pi 4/3B+/3B/Zero W Robot, IoT, sensori, motori, servi driver, batteria ricaricabile inclusa, 5V2A, altoparlante, ADC, PWM, IIC, UART,
34,99€
disponibile
as of 8 Maggio 2024 6:52
Caratteristiche
- Soluzione hardware all-in-one: Robot HAT integra funzionalità come la guida del motore, l'uscita audio, l'ADC e PWM, offrendo agli utenti una piattaforma hardware completa. Ciò elimina la necessità di acquistare e collegare più moduli individuali, risparmiando tempo e costi. Compatibile con Raspberry Pi 4/3B+/3B/Zero W/Zero.
- Compatibilità ed espandibilità senza soluzione di continuità: perfettamente allineato con i pin GPIO del Raspberry Pi, garantisce una connessione impeccabile. Con interfacce multiple come SPI, UART e I2C, offre agli utenti un'ampia gamma di opzioni di espansione e connettività, per soddisfare varie esigenze di progetto, inclusi robot mobili, sistemi domestici intelligenti e sistemi di irrigazione automatizzati degli impianti.
- Gestione avanzata dell'alimentazione: dotato di capacità di ricarica per batterie al litio e di una scarica CC-CC 5V/3A, fornisce una fonte di alimentazione stabile per Raspberry Pi e altri dispositivi, rendendo fattibili progetti mobili e wireless.
- Sicurezza e affidabilità: il Robot HAT è dotato di molteplici meccanismi di protezione, tra cui protezione da inversione di polarità, protezione da sottotensione in ingresso e protezione da surriscaldamento, garantendo un funzionamento sicuro in varie condizioni.
- Supporto educativo e comunitario: uno strumento eccellente per l'apprendimento e l'istruzione, il Robot HAT è adatto per principianti, ingegneri e insegnanti. Offre una vasta gamma di tutorial, risorse tecniche, assistere gli utenti a iniziare e dare vita alle loro idee.
IBest for Raspberry Pi Pico Display 3.5inch Touch Display Module 480×320 Pixels 65K Colors LCD IPS Screen with Resistive Touch Controller XPT2046, ILI9488 Driver, Using SPI Bus
28,90€
disponibile
2 new from 28,90€
Spedizione gratuita
as of 8 Maggio 2024 6:52
Caratteristiche
- 480×320 resolution 65K colors IPS screen for Raspberry Pi Pico,clear and colorful displaying effect
- Dedicated touch controller, bringing more smooth touching effect than AD-controlled solutions
- MicroSD card slot for storing images and direct displaying them easily
- Programmable backlight control, power saving
- Comes with development resources and manual (Raspberry Pi Pico C/C++ examples)
Adafruit PiTFT 2.4" HAT Mini Kit - 320x240 TFT Touchscreen
52,69€
disponibile
as of 8 Maggio 2024 6:52
Caratteristiche
- Adafruit parte numero: 2455
- Stock tipo: Raspberry Pi > > Raspberry Pi B +, Raspberry Pi 2, Pi 3 > > pi cappelli e piatti
- Merce stoccata nel Regno Unito magazzino
- In magazzino e pronto per la spedizione
- Spedizione gratuita nel Regno Unito
Adafruit GPIO ADA1988 - Cavo a nastro per Raspberry Pi Model A+/B+/Pi 2/Pi 3
14,73€
disponibile
as of 8 Maggio 2024 6:52
Caratteristiche
- Adafruit Part Number: 1988
- Stock Type: Raspberry Pi > > Cables > > Raspberry Pi A +, B +, & Pi 2
- Magazzino nel cuscinetto UK/EU
- In magazzino e pronto a spedire
- Spedizione gratuita